What should be paid attention to in the daily maintenance of the ice machine, and the following five aspects should be carefully done during use:

1. If there are many impurities in the water or the water quality is hard, it will leave scale on the evaporator ice-making tray for a long time, and the accumulation of scale will seriously affect the ice-making efficiency, increase the energy consumption cost and even affect the normal business. Maintenance of ice machine requires regular cleaning of waterways and nozzles, usually once every six months, depending on local water quality. Waterway blockage and nozzle blockage can easily cause premature damage to the compressor, so we must pay attention to it. It is recommended to install a water treatment device and regularly clean the scale on the ice tray.

2. Clean the condenser regularly. The ice machine cleans the dust on the condenser surface every two months. Poor condensation and heat dissipation will cause damage to compressor components. When cleaning, use a vacuum cleaner, small brush, etc. to clean the oil dust on the condensation surface, and do not use sharp metal tools to clean it, so as not to damage the condenser. Keep ventilation smooth. The ice maker must unscrew the water inlet hose pipe head for two months, and clean the filter screen of the water inlet valve, so as to avoid the water inlet being blocked by sand and mud impurities in the water, which will cause the water inlet to become smaller and lead to no ice making. Clean the filter screen, usually once every 3 months, to ensure smooth heat dissipation. Too much expansion of condenser can easily lead to premature damage of compressor, which is more threatening than blockage of waterway. Clean condenser Compressor and condenser are the main components of ice maker. The condenser is too dirty, and poor heat dissipation will cause damage to compressor components. Dust on condenser surface must be cleaned every two months. When cleaning, use a vacuum cleaner, small brush, etc. to clean the dust on the condensation surface, but do not use sharp metal tools to avoid damaging the condenser. . Clean the ice mold and water and alkali in the sink once every three months.

0.3T flake ice machine

3. Clean the accessories of ice maker. Replace the filter element of water purifier regularly, usually once every two months, depending on the local water quality. If the filter element is not replaced for a long time, many bacteria and poisons will be produced, which will affect people’s health. The water pipe, sink, refrigerator and protective film of ice maker should be cleaned once every two months.

4. When the ice maker is not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer. It should be placed in a ventilated, dry place without corrosive gas, and should not be stored in the open air.

5. Check the working condition of the ice machine frequently, and unplug the power supply immediately if it is abnormal. If it is found that the ice maker has peculiar smell, abnormal sound, water leakage and electricity leakage, it should immediately cut off the power supply and close the water valve.

0.5T flake ice machine